.

FMR05G

5 stage, 50 gallons a day with JOHN GUEST fittings

Only $229 ( compare to up to $459 retail ) plus shipping and handling click here to contact us or call 800-761-9201
  • All systems are fully tested prior to shipment (for functions, pressure and leaks)
  • Top quality components to assure superior performance and eliminate after installation service
  • FILMTEC® 50 GPM membrane (NSF certified)
  • C-MAX®  solid block carbon pre-filter (NSF component certified)
  • ROPRO®  plastic storage tank, rated for pressures to 100 PSI (NSF component certified)
  • FLOWMATIC® FH4200 filter housings (NSF component certified)
  • TOUCH-FLO® faucets are lead-free meeting California's lead free standards.
  • 3/8" tubing from tank to faucet for greater flow.
  • Genuine John Guest® fittings for superior performance
    and easy installation.
  • Entire systems are NSF certified
    (including Nitrate / Nitrite reduction)
  • Premium melt blown pre-filter and GAC post-filter
  • Wrench for sump removal

Feed Water Guidelines

 Maintenance & Warranty

Maximum TDS

2,000 ppm

Iron, max

0.3 ppm

Hardness, (less than)

15 gpg

Hydrogen sulfide

0.0 ppm

Manganese, (less than)

0.05 ppm

Turbidity, (less than)

1 NTU

Pressure, min. / max, psi

30 / 100
Temperature, range (F)
40° / 100°
pH
3-11
Pre and post filters
Recommended change every six months
for regular usage, or once a year in light usage.

RO membrane
Change recommended based on periodic TDS
rejection tests. Typical is every two years.

Warranty
Components are warranted for one year from
installation, excluding membrane, pre & post
filters. See installing dealer for system warranty
Note: Pretreatment suggested if conditions exceed parameters.

Specifications

Tested for Quality Performance

Production

50 gals. per day

Storage tank

ROPRO4® * (2.6 glas.)

Membrane

Filmtec® by Dow Corp.

Sediment pre-filter

5 micron spun cartridge

Activated carbon pre-filter

NSF listed solid block carbon

Activated carbon post filter

AICRO*

Filter Housings

Flowmatic FH4200WW*
Faucet
Lead Free**
Fittings
J, compression; G, push-on

 
All reverse osmosis system
are fully tested at the factory
for quality assurance. QC
tests include flow, pressure,
storage tank integrity and
pressure; functional tests
for shut off valves, check
valves & other components;
and rejection tests of total
dissolved solids for systems
with factory installed
membranes.
Component certified for materials & structural integrity.
**Meets CA req.
Caution: Do not use where water is microbiologically unsafe or with water of unknown quality without adequate disinfections before or after the unit.
System must be maintained according to manufacturer's instructions.

 

DOWNLOAD
CONSUMER
BROCHURE
IN PDF

Free Web Counter
Free Web Counter